abilify, online pharmacy
PASMAG | PERFORMANCE AUTO AND SOUND - JVC KW-NT3HD Navigation/DVD/CD/MP3 Receiver - Page 2 real celebrity porn
celebrity sex tapes
celebrity porn tube
Header Image

 

Navigation_NT3_img_E_th

 

LISTENING

As the source in my reference system, the JVC KW-NT3HD did a fine job. Whether the source was HD Radio, CD, DVD, or my iPod, the sound was very good. The unit has a natural, open sound to it with no trace of harshness or “digitizing”. I watched a couple of music videos and I found the screen to be very clear and sharp, and also very easy to adjust to my particular preference. There is also a setting that improves the off axis viewing of the built-in screen for your passengers. One thing that others could take notice of is the excellent rotary encoder used for the volume control. This knob can be spun very quickly and will react properly if spun fast, whereas so many others “get lost” and make no difference at all when turned to rapidly.

The tone and crossover adjustments work perfectly, and there is no digital “zipper” noise when making adjustments. From a sonic perspective, my listening proved the KW-NT3HD to be an excellent source for all of your music.

 

 

ON THE BENCH

As always, these evaluations end with a thorough bench testing and the meticulous measurement of all the important specifications. I found the measured performance of this sample to be pretty much as advertised. The only tiny discrepancy I noted was a power rating of 19.3 watts instead of the rated 20 watts. Certainly nothing audible or to cause concern.  Preamp output voltage was 2.5V as advertised, and the frequency response was pretty much ruler flat from 20Hz to 20kHz. Measured output impedance was a bit higher than I’d like to see it at almost 500 ohms, but JVC spec it at 1000 ohms, so you could look at it as if it’s twice as good as advertised.

 

MEASURED SPECIFICATIONS

 

AMPLIFIER

CEA-2006A Power per channel (all channels driven,@ 4 ohms)…19.3watts/ch x 4

A Wtd S/N Ratio (ref to 2V/1W @ 4 ohms) Amplified output……… -77.8dBA (CD)

THD+N @ 2V/1W @ 4 ohms 1kHz ………………………………….....0.15%

Frequency Response (-3.0dB) …………………………………………20Hz – 20kHz

 

PREAMP SECTION

Max Usable Output Voltage ……………………………………………...2.5Vrms

A Wtd S/N Ratio ref to full output voltage………………………………...-88.7dBA

Output Impedance …………………………………………………………493ohms

Frequency Response (-3.0dB) …………………………………………..20Hz – 20kHz

CONCLUSION

For around $1200.00(CDN) for the KW-NT3HD and $1200.00(USD) for the JVC KW-NT3HDT with Traffic function, this is a very high tech, exceedingly fully featured head unit. It’s well made, sounds great, and is easy to use. Capable of integrating virtually every function and convenience feature you could want, and maybe a few you hadn’t even known were possible.