Tony Nazzal - 2004 Nissan 350Z

Everyone has a weakness and even the toughest street fighter has a weak spot if you can strike the right pressure point. Tony Nazzal’s 350Z has gone through many iterations over the years, to eliminate all the weak spots he had identified. When I first saw this Z33, it had next to nothing in the power-adder department but you could see that Nazzal was going to take to strengthen it and build a prize fighter. That was around five years ago and Nazzal has continued to build his creation into something rarely seen in the Spo-Com world. This time around, Nazzal went through the painstaking process of tearing the shell apart and fitting it with a widebody to set off the appearance of the Z like nothing we’d seen before. He turned to widebody specialists, BRS Autodesign to source out a Version III JGTC widebody kit for the Z. After it was slightly customized, the hood was modified to clear the Eaton-style blower and fitted with Aerocatch hood-pins. The body was then shot in several layers of Dupont Chromallusion paint called Absolute Purpeen. “The trademark of my project has always been the Chameleon paint scheme,” states Nazzal. The roof was then sprayed in gloss black and the rear deck was fitted with an APR GT500 carbon fiber wing. Nazzal added some smaller accents like carbon fiber B-pillars and airbrushed “Z” and “Nissan” logos.

Tony Nazzal - 2004 Nissan 350Z

From there the attention turned back to the motor. “The car was being ranked in the highest classes at car shows and did well holding its own against completely done and insane widebody JDM themed vehicles, without a widebody or crazy motor,” admits Nazzal. However, it was time for Nazzal to start paying his dues under the hood. The jam was to be made with a supercharger and when it came to pull the trigger on one, Nazzal went with the Nissan experts at Stillen. This stage 4 kit has dual fuel maps for both pump and 100 octane, and keeps it fat since the internals are stock. A 7th injector has been added and the fuel is jammed in with a Walbro 255lph pump providing the stream of fuel. The compressed air heads into an air-to-liquid chiller before it heads to the chambers. The spent gases are directed out of DC Sports headers and into a Motordyne single exit titanium exhaust.

With the bump in power, the Z needed some suspension and brakes to harness it. A set of K&W Variant 3 coilovers were added to the project for advanced adjustability. Then Cusco rear upper control arms were bolted up along with Stillen adjustable sway bars and front strut bar. Nazzal went through the hassle of removing the entire suspension and then either chroming or powder-coating every piece.

Tony Nazzal - 2004 Nissan 350Z

In the braking department, StopTech gear was added including a 4-piston/355mm front brake along with a 4-piston/330mm rear connected by stainless lines filled with Motul RBF600 fluid. The wheels and tires commanded Nazzal’s full attention during selection and sizing. He got the legendary Foose to build a custom set. These bad boys measure 20x8.5-inches in the front and 20x10.5-inch with whopping 7-inches of lip in the rear. Since Nazzal is sponsored by Continental Tire, he selected the impressive Sport Contact 2 in a 245/35R20 in front and a healthy 275/30R20 in the rear, then the whole package bolted up with Trust lightweight lug nuts.

As a former winner of many awards, it didn’t come without hard work everywhere on the car. Inside, some Bride gear such as the Euro II passenger seat and the Profi XL driver seat are both reupholstered custom suede. The Brides are draped with a 5-point driver-side and 4-point passenger-side harness. There are matching Bride floor mats and custom Bride fabric on the headliner, doors, trim panels and rear hatch. The dash and pillars have been wrapped in black suede and the console has been wrapped in carbon fiber overlay. All steering inputs are made via a Personal Grinta wheel connected to a Works Bell quick release.

The audio install includes some of the best gear on the market. The first order of business was to source a Kenwood DVX700 double-DIN headunit with touchscreen. Signals are fed to a pair of Boston Acoustics amps, one mono and one 4-channel. From there, the mono drives the Boston Acoustics subwoofers and the multi-channel heads to Boston Acoustics 6.5-inch component speakers. A trio of Kenwood 6.5 monitors were added in both the console and on the passenger side and a massive 19-inch monitor found in a custom rear floating enclosure. The electronics are rounded out with a Playstation2 slim in the glove-box along with a Valentine One radar detector in a stealth location.

A total of four years in the making, Nazzal has truly poured everything into his car. A total of $80,000 and four years equates to what you see here and that is with the discount at his job as the Parts Manager of Riverside Infiniti in California! Look for Nazzal and his team-mates of Ar’Kan to put a dent in the show scene and hit a few pressure points of their own.


Tony Nazzal - 2004 Nissan 350Z

Owner: Tony Nazzal
Location: Ladera Ranch, CA
Vehicle: 2004 Nissan 350Z

Internally stock vq35de
Stillen customized stage 4 supercharger kit. Dual fuel maps for pump gas and 100 octane.
Upgraded 7th injector, Walbro 255 fuel pump in tank
K/N intake
Grounding kit
Front mount air-liquid intercooler kit
Motordyne single exit, titanium exhaust setup w/ xyz pipe
Koyo radiator
Nismo thermostat
Samco hose kit
DC headers
ARC oil cap
ARC radiator cap
Custom polished front engine cover and cam covers
Polished supercharger unit

Slightly customized brs version 3 jgtc style wide-body kit
Dupont chormallusion paint (called “absolute purpleen”)
Custom built hood (to clear supercharger)
APR GT500 carbon fiber wing w/ custom carbon end plates (with ghost “Z” logos airbrushed on) and custom made mounting leg plates
ARC lower engine cover (painted gloss black)
Roof painted black
Airbrushed rear Nissan logo on hatch
Nismo carbon fiber b-pillars
Custom stickers/ logos w/ color shifting vynil
Custom made radiator cooling panel
Painted radiator core support
Aero catch hood pins

All custom lighting done by mike at
Upgraded 06 dual Xenon projector headlights custom painted black w/ custom led lighting
JDM clear tail lamps w/custom red led work
Custom led rear turn signal lamps w/built in led reverse and rear fog lamps
LED license plate lights
All interior lighting done by clear corners as well.

Custom 1-off Foose wheels 20x8.5 , 20x10.5 custom offsets (rears have 6 ¼ “ lip)
Tires sized 245-35-20 and 275-30-20 Conti Sport 2
Greddy / Trust lug nuts
Stoptech 6-piston 14” front bbk w/ 2-piece Aero rotors
Stoptech 4-piston 13” rear bbk w/2-piece rotors
Stoptech stainless lines
Axxis ultimate brake pads
Motul rbf 600 fluid

Custom powdercoated and polished
Full rear subframe, lower control arms, hubs, spindles, rear camber / control arms
KW version 3 suspension,
Cusco front upper camber arms
Cusco modified roll cage
Custom powdercoated stillen adjustable sway bars
Stillen custom polished front strut bar

Kenwood DVX 7000 head unit w/ built in dvd / touch screen.
Kenwood 6.5” monitors x3, one in center console, 2 in pass. side dash (removed airbag).
Boston Acoustics 10” subs in custom flush mounted fiberglass enclosures in rear trunk area,
Boston Acoustics 6.5” front and rear components
Boston Acoustics front tweeter soundstage enhancement setup w/crossovers
Rear 19” monitor in custom floating enclosure
Boston Acoustics 4-channel and 2-channel amplifiers flushed into rear trunk
Kenwood / garmin flash drive navigation
Built in ipod controls
PS2 in rear console glove box
Custom billet valentine one radar mount for rear view mirror

Bride Euro II pass side seat w/ custom gradation and suede
Recaro profi XL driver’s seat w/ custom suede
Bride headrest pad for driver’s seat
Bride custom made floor mats
Bride logo’d headliner, doors, rear strut bar cover plates, and rear hatch lid
Custom suede complete dash driver and pass. side.
Carbon fiber wrapped center console
Greddy boost gauge in custom suede wrapped and molded into a-pillar
Takata 4 point pass side harness
Takata 5 point driver’s side harness
Aluminum door kick plates and pedals
Carbon fiber gauge cover, air vent covers, dash trim, door vent and panel trim all by rsw japan
Personal Grinta steering wheel suede w/yellow stitching
Works bell quick release hub and adapter
ARC shift knob, custom carbon style shift boot

Continental Tires, Motordyne Engineering, GT Spec, APR Performance, Stoptech,, Riverside Infiniti, C2 Auto, Gen X Graphics / Design, Stillen, DNA Distribution (Kenwood & Boston supplier)


More Vehicle Features

Shooting Stars: A Star Road GT-R Double Shot

I’m still pinching myself that it actually came to pass. Initially, I thought the opportunity had faded, months having passed since learning the very rare and valuable machine was heading way up north to its owner (and far away from…
Read More


Rewind back to SEMA ’07 and the entire PAS staff is atop the Rio hotel in Las Vegas. The venue is the Voodoo Lounge and we’re hosting one of the most memorable parties of the year with our good friends…
Read More

Tuner Battlegrounds Championship 2017: Recap Of The Competition At The Big Show

Five years of Tuner Battlegrounds. That's such a mind-blowing sentence to be able to say. Five whole years of enthusiasts showcasing their builds through our competition for the chance to be on the cover of PASMAG and experience having their…
Read More

Doctor Emory Chang's 1994 Mazda RX-7

Orthopedic surgery entails the correction of skeletal problems within the human body, especially the spine. Surgeons in this branch of medicine try to repair the bodies of people who have been injured to give them relief from the pain and…
Read More

AEM's 2008 Subaru WRX

Written by Dave Pankew | Photos by RCH Designs For whatever reason, there are many people in the industry out there that believe we are from California. It makes sense because most of the magazines on the scene are based…
Read More