30 June 2010|
|Exterior Parts Buyer's Guide - 2010|
Dry Carbon Fiber Wide Front Fenders
Extended a full 38mm, and much lighter than stock, the PWJDM wide front fenders were designed to accommodate a 20x11 wheel wrapped in 315/30/20 Toyo R888. These are the widest tires available for the rear of a stock GT-R. Being an AWD car, it’s only fitting that the same tires are on all four corners. With these PWJDM GT-R wide front fenders, the goal has been achieved. You can easily push that corner that much faster when you know your car will be able to handle it. Getting wider fenders to accommodate wider tires are a must if you seriously drive your GT-R to the limit.
Dry Carbon Fiber Street Canards
Set at 22.5 degrees of rake, the Password:JDM dry carbon street canards will generate 43lbs of downforce per side in the frontal corners starting at 40mph. That is 86lbs of downforce up front without the use of any additional splitters... with the use of a functional front splitter, you can balance the amount of downforce required as per your setup and application per race track.
VIS carbon fiber hoods are made from the finest carbon fiber available. This carbon fiber material meets all ISO Standards. ViS carbon fiber hoods are Grade “A” quality. Each hood is inspected by our quality control department before leaving our facility to ensure the highest standard of quality and live up to our reputation in surpassing all other hoods alike. VIS carbon fiber hoods are manufactured using a two piece construction – a carbon fiber topside with a black gloss, fiberglass, one piece underside to optimize structural integrity. All of our hoods have rolled edges and are protected with a UV coating which allows the hood to maintain its high gloss finish. The result; a hood that excels above the rest in quality and performance. All VIS carbon fiber hoods come with a VIS Authenticity badge so be sure to look out for this when purchasing any carbon fiber hoods
Carbon Fiber Hoods
Front Lip Spoiler
Utilizing Steve Millen’s expansive racing heritage, Stillen is proud to release functional high quality urethane front lip spoiler for the Nissan GT-R R35. The Stillen Urethane Lip Spoiler adds 2 inches of length to the OEM fascia, and installs directly onto the vehicle over the factory piece. This lip spoiler is designed to hold additional air onto the nose, with flares on the side corners producing a canard effect for extra control. Constructed out of high-quality polyurethane, this front spoiler is nearly indestructible and carries a limited lifetime warranty. This means it can stand up to the hazards of the race track or the drive around town.
Seibon Carbon makes your car cool, lighter, and stronger by dressing it in carbon-fiber and Dry Carbon. Utilizing deluxe French or US-made carbon fiber, and rigorously-inspected during a multiple-step quality control process, the carbon-fiber upgrades from Seibon Carbon are the ultimate choice in aerodynamic performance. Seibon Carbon, specializes in the design and manufacture of high-quality carbon-fiber automotive body components such as hoods, trunks, fenders, doors, roofs and aerodynamic body additions such as lip kits, side skirts, and rear spoilers.
Read on for More Products