Article Index
Suspension Buyer's Guide - 2010
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
All Pages

Suspension-Icon

 


Progress_Technology_Honda_Fit

Progress Technology
Honda Fit Suspension

www.progressauto.com

The Progress Group has developed a rear anti-roll bar and sport lowering springs for the Honda Fit. The rear anti-roll bar is 19mm solid, alloy steel that bolts directly onto the rear axle beam for an easy, bolt-on installation. This new anti-roll bar system will improve chassis balance, quicken steering response and minimize body roll while cornering. All Progress anti-roll bars are manufactured in-house, feature precision MIG-welded ends and are powder coated metallic gray. Combine the rear anti-roll bar with the all-new Progress sport-lowering springs. These springs feature sport-tuned rates and a modest drop of 1.2 inches in the front and 1-inch in the rear. They have been developed for use with OEM or sport dampers. The springs are cold wound, shot peened, pre-set, and include a lifetime warranty.

 

 

 

 

 



Skunk2 Honda & Acura Cams

There are only a handful of American tuners that focus specifically on Sport Compacts. Sure, there are many who have done well, but one tour of the Skunk2 facility in Norco, California and you’ll understand…
Read More

Endless Racing Mono 6 Brake Kit

The Racing Mono 6 has been created using several thousand tons of pressurized forging. Four years in the making and after extensive testing in race conditions, Endless has finally produced this caliper to achieve their…
Read More

Takeda USA Attack Cold Air Intake

The new Takeda Attack cold air intake is a true cold air intake design replacing the factory intake and locating the high flow air filter away from hot engine compartment air increasing air volume and…
Read More