Everest_sound_labs_7.5K

 

Everest Sound Labs has some powerful new products on display at the 25th Annual Spring Break Nationals in Daytona Beach FL. Their new ES-D Class D amplifiers are designed by industry veterans with a combined 75 years of mobile electronics experience. The new amplifiers incude 7,500 and 10,000 Watt models designed for extreme SPL competition.

The new ES-D series of Class D amplifiers are designed and built with competitors in mind. All ES-D amplifiers are 1-Ohm stable and are capable of operating on on electrical systems up to 18V for seriously monstrous power output. With more than 9,000W on tap from the big-daddy ES-D7500.1, these amps are sure to take home trophies whenever they compete.

The ES-D3500.1, ES-D5000.1 and ES-D7500.1 are currently available to pre-order  from the Everest Sound Labs website. Visit www.everestsoundlabs.com or call 1-386-308-LOUD for more information

 

Class-D Mono Amplifiers Standard features:
Frequency Response:  15Hz ~ 270Hz  
Signal to Noise Ratio:  85dB
Damping Factor:  >200
Input Sensitivity:  6V ~ 0.2V
Crossover Slope:  24dB / Oct  
Low Pass Filter:  35Hz ~ 250Hz  
Subsonic Filter:  10Hz ~ 50Hz
Bass Boost:  0 - 9dB @ 45Hz   
Master / Slave Connection (Linked to 2 Ohm)   
Phase Shift:  0 ~ 180 degrees
Remote Control  
Working Voltage:  8.5V ~ 18V

 

Amplifier Specifications:

Model: ES-D3500.1
Power @ 4 Ohms at 14.4V - 993 x 1
Power @ 2 Ohms at 14.4V- 1855 x 1
Power @ 1 Ohm at 14.4V -  3509 x 1
Power @ 1 Ohm at ~16V - 3983 x 1
Power @ 1 Ohm at ~18V - 5111 x 1
Working Voltage - 8.5 to 18V
Length 18.9"

 

Model: ES-D5000.1
Power @ 4 Ohms at 14.4V - 1500 x 1
Power @ 2 Ohms at 14.4V- 2775 x 1
Power @ 1 Ohm at 14.4V -  5000 x 1
Power @ 1 Ohm at ~16V - 6050 x 1
Power @ 1 Ohm at ~18V - 7463 x 1
Working Voltage - 8.5 to 18V

Length 25.6"

Model: ES-D7500.1
Power @ 4 Ohms at 14.4V - 2217 x 1
Power @ 2 Ohms at 14.4V- 4425 x 1
Power @ 1 Ohm at 14.4V -  7673 x 1
Power @ 1 Ohm at ~16V - 8542 x 1
Power @ 1 Ohm at ~18V - 9034 x 1
Working Voltage - 8.5 to 18V

Length 34.65"

IASCA welcomes Boom Mat to its family of Industry Supporter Members

Boom Mat, the acoustic control division of Design Engineering Inc., one of the foremost suppliers of automotive thermal tuning products, has aligned with IASCA to promote their line of products to the 12 volt industry.…
Read More

JBL Legend CP100 In-Dash Smartphone Receiver

The JBL Legend CP100 in-dash smart phone receiver upgrades your dual-DIN system to a 6.75- inch touchscreen connected car experience. The JBL Legend CP100 is Bluetooth-enabled, has a rear camera input, is steering wheel interface…
Read More

Brax Helix A4

In October 2010, the Rockford Corporation inked a deal to become the exclusive U.S. distributor of some of the most exclusive German-made car audio equipment available anywhere in the world. The Audiotec Fischer brand was…
Read More