How To Set Up A Drift Car PASMAG

Drifting has skyrocketed in popularity over the past decade, and everyone wants in on the action. Before you get in your RWD car and head to the track to get sideways, it’s important that you have your car set up properly. In order to get an idea of what you’ll need to modify, both at the amateur level, and when you get a little more competitive, we sat down with Pat Cyr. Cyr is a professional drifter who has assembled numerous drift cars in his shop, Cyrious Garageworks. We broke it down section by section to get you started.

SUSPENSION

Starting out:
You’ll want some coilovers to get the car lower for handling the abuse of throwing it around. Adjustable lower control arms and toe arms will help you correct alignment specs after lowering. Aim for as close to 0-degrees of rear camber as possible. Consider high-angle inner tie rods to get a few more degrees of steering over stock, without having to commit to a full angle kit.

Later:
If you start drifting competitively, it’s time to look at fine tuning adjustable coilovers for each track layout. You want to allow max weight transfer to the rear of the chassis for traction purposes. Fully adjustable angle kits, like Wisefab kits, will give you more angle.

ENGINE

Starting out:
Keep it stock! Beginner drifters should learn how to use speed and momentum to drift with low horsepower, not some high-power setup that you’re afraid to push. Stock engine setups tend to be more forgiving with abuse, which will give you maximum seat time on track day.

Later:
Once your skill level has progressed to the limitations of your setup, then consider adding power with bolt-ons, or go all out with an 800 horsepower 2JZ. Whichever works for you.

INTERIOR

Starting out:
A good supportive racing seat is all you need to get started. Feel free to remove things like the spare tire and jack in order to shave some weight, as well as remove any loose objects that could become projectiles.

Later:
If you start taking things seriously with big power and higher speeds, it’s time for a drift-spec roll cage, racing harnesses, and a stripped interior. Competition cars include things like fuel cells and rear-mounted radiators to keep some weight over the rear.

WHEELS/TIRES/BRAKES

Starting out:
Your stock brakes and e-brake will be fine for now, but consider upgraded street pads that can handle the heat. Keep the wheels the same width as stock when learning, but a grippy set of front tires will help prevent understeer and let you get confident.

Later:
When things get serious, every bit of weight counts. Lightweight brake kits keep unsprung weight down, and a rear dual caliper setup allows a consistent and quick application of e-brake-induced lock up. Grippy tires are still as important as ever, but are often wrapped around staggered wheel setups, with 1-inch smaller wheels up front for quick steering response during transitions. As power increases, so too does the size of the tires, especially in the rear.

DRIVETRAIN

Starting out:
It’s okay to learn on a stock differential. Limited-slip differentials will help you get used to the feeling of breaking the rear tires loose, especially if you throw in some clutch-kicking.

Later:
Speaking of clutch-kicking, if you start making that a habit, it might be a good idea to upgrade your clutch to something a little heavier duty. Stage 2 or stage 3 clutches from most aftermarket brands will be capable of handling any increased power. Consider spool differentials (1.5-way, 2-way) and upgraded axles if you start adding serious power to your setup.

More Articles

On Point: LSx Swapped Rocket Bunny RX-7

Spotted at Stance WI: After Dark at Miller Park Stadiium in Milwaukee, WI, On Point Motorsports brought out their LSx swapped Mazda RX-7. This RX-7 helped to debut the first RX-7 Rocket Bunny body kit in North America. Watching it…
Read More

Formula Drift: Mid-Season Pit Notes

As the Formula D Season progresses, several smaller story lines continue to develop at each stop. Unfortunately, with the limits of print coverage, we can’t always fit them into our story. This is a rare opportunity to showcase some of…
Read More

Hips and Lips: Rotiform VW Mk2 Bodykit

Written by Micky Slinger | Photos by Rotiform Rocket Bunny and Liberty Walk are giving all kinds of love to the exotics and Bimmers, but there’s none for your VW. What’s the deal? It’s all good, buddy. Rotiform has your…
Read More

MF Ghost: Initial D’s Spiritual Successor?

For fans of the tofu delivery driver turned downhill racing prodigy, Takumi Fujiwara, and his adventures in Shuichi Shigeno’s Initial D manga and resulting anime series, it’s been a long wait since the wheels on the books and animation came…
Read More

Formula Drift Preview: Behind the Builds

Each year, Formula D drivers make the difficult decision whether to simply rebuild and upgrade their current for the upcoming season, or start from scratch with a new build. There will be no less than 10 brand-new builds debuting at…
Read More