Sony Scion Project: Big Brake Upgrade

Shops, People & Opinion Dave MacKinnon l Photos by Mark Harris

The Project Scion tC has moved through many stages of development – power, entertainment and style to name just a few. It’s now time to address an area that is truly functional and can make or (literally) break the success of any performance build – braking. We are honored to be the first to install the new TRD big brake kit for the tC, and thanks to the crew at International Automotive and Custom in Woodbridge, Ontario, the install was painless.

The TRD PTR09-21111 kit features a set of monoblock 4-piston calipers, upgraded brake pads, new brake lines, a pair of cross-drilled, vented rotors and mounting hardware. The size of the rotors and caliper pistons has been carefully chosen to maintain proper front/rear braking bias and ABS functionality. This kit is designed to work with with the tC’s OEM 18-inch wheels in addition to the aftermarket variety that are at least 18 inches in size.

Step 1: Remove OEM brakes

As with most OE-developed products, a very detailed 13-page installation manual is included.

• Raise the car on a chassis hoist and remove the wheels and store in a safe place away from the vehicle.

• Disconnect and cap the factory rubber brake line from the hard line.

• Remove the OE brake caliper and hose, bracket and rotor. Discard or sell on eBay.

Step 2: Modify factory dust shield

• Clean the dust shield and mark the areas to be removed with a paint marker as per pages five and six of the instructions.

• Using tin snips (and wearing gloves) cut away the metal. Use an angle grinder to clean up the edge if required.

• Spray or paint the exposed metal edge with Tremclad or a similar product to prevent rust.

Step 3: Install the TRD rotor

• Clean the surface of the hub with a wire brush to ensure the rotor will sit flat.

• Clean the shipping anti-rust coating off the front and back of the rotor with brake cleaner.

• Slide the rotor onto the hub and tighten with a single lug-nut by hand to hold it in place.

• Check for proper clearance between the rotor and the dust shield. Trim the dust shield if necessary.

What Is Fuel Stabilizer Doing? STA-BIL Products Unboxed

Graphene is a scientific development that's been at the forefront of innovation across multiple industries and technologies. Recently, it's been...

LiquiMoly Sponsors the Largest Porsche 356 Meeting in the World

Get ready to rewind to the roots of Porsche’s lineage as Portugal plays host to the International Porsche 356 Meeting this year. With LIQUI MOLY...

Forgeline Celebrates 30 Year Anniversary

Celebrating three decades of craftsmanship and innovation, Forgeline Wheels marks its 30th anniversary this year. Founded in 1994 by the Schardt...

Yokohama Tire Introduces New All-Terrain GEOLANDAR A/T4 G018

Yokohama Tire is rolling out the GEOLANDAR A/T4 G018, set to redefine the adventure and utility blend for trucks, SUVs, and CUVs. Hitting U.S. markets...

Dress Up Bolts Launches New Trunk Interior Kits for Subaru Models + Toyota 86

Introducing Dress Up Bolts' Plastic Clip Delete Trunk Kit: a stylish upgrade for BRZ/GT86/FR-S owners seeking a refined and resilient alternative to...

Ranking R34 Skylines For Sale in Canada

Nissan's R34 Skylines (1998-2002) are finally eligible for import into the United States after their 25-year import law cooldown. Just to the north of...